Dreality
Sign in
My orders
Upload your image

AI logo to vector: what to check before you send it to print

Updated 2026-10-30

To print an AI-made logo you need three things done: turn the pixels into vector shapes, fix what the generator got wrong, and set the file up the way your printer wants it. A flat one-color mark may need only a trace, while a badge, a mascot or a logo with words usually needs all three. The free print check tells you which, for your file and your print method, in seconds.

Free print check

Run free print check →

Run free print check · You only pay once you approve the proof · First proof within 24 hours

This page is for any generator. If you know where your logo came from, there are pages with the details we could confirm from the tool’s own documentation: ChatGPT logo to vector and Midjourney logo to vector.

Five checks, two minutes

CheckHow to do itWhat printers say
1. Pixels per inchDivide the file’s pixel width by the print width in inches.Acclaim Screen Printing asks for at least 200 DPI at print size. Sticker Mule asks for 300 PPI. Maine Printing says web images “are 72dpi or less and will require complete redrawing.”
2. LettersZoom to 400% and read every letter.Printers print what the file shows. Both OpenAI’s and Midjourney’s documentation say generated text can come out wrong.
3. ShapesLook for wobbly symmetry, lines that stop short, and parts that don’t match their twins.A cutter or screen follows these exactly.
4. BackgroundPlace the file on a colored background.Transfer Superstars, a DTF printer: “if there’s a white canvas behind your design, you’ll end up with a white rectangle on your garment.”
5. Number of colorsCount the flat color areas, ignoring edge blending.Select Printing prints “up to 6 different spot colors.” Embroidery sources in our research say 5 or 6 thread colors.

The first check is arithmetic you can do now. A 1024 px image printed 10 in wide is about 102 pixels per inch. A 2048 px image is about 205. Both fall short of 300.

Three ways to get it done

Do it yourself. Illustrator’s Image Trace and Inkscape’s Trace Bitmap are free or already in your toolbox, and they work for simple flat logos. They trace what’s there, so wobbly shapes and wrong letters come out as wobbly shapes and wrong letters, and the result can be hundreds of tiny paths. In our own test on one AI-made badge, an open-source tracer at default settings made 7,978 anchor points and 836 paths.

Ask your printer’s art department. It’s convenient, and for a simple job it can be cheap: one promo-products shop lists an average art charge of $20. Other shops publish hourly rates of $35 to $75, and some only say they will quote. You may not see what they changed or get the editable file back.

Use a marketplace freelancer. In the seven listings we read, prices ran from $5 to $60 per job with delivery in 1 to 5 days, and you message back and forth to get the details right. None of the seven mentioned spot colors, cut lines or bleed.

Use Dreality. The price is shown when you upload, from $19 for a flat logo, and your first proof comes back within 24 hours. You pay once you approve it. We fix the AI’s mistakes, build files for your print method, send a one-page print report, and if your printer rejects the file within 30 days, we fix it free. Editable source files and all formats are included.

Pick the one that fits the image. If the check shows your file is fine as it is, use it.

What it will cost

Your imageTierPriceNew customer, first order
Flat logo or wordmarkFlat logo & wordmark19 credits ($19)10 credits ($10)
Badge or mascotBadge & mascot29 credits ($29)15 credits ($15)
Gradients or many partsGradient & complex39 credits ($39)20 credits ($20)
Fine texture or engraved shadingDetailed illustration59–79 credits ($59–79), quoted when you uploadNot included

The hardest part of the image sets the tier, and if we misjudge it we carry the difference. Credits cost $1 each, or pay $45 for 50 credits and $85 for 100. A change after delivery costs 5 credits. No PayPal account needed — pay with any card.

How we build files for your print method

  • Screen printing: spot colors, one layer per ink, text outlined.
  • Stickers: a named cut line, bleed and safe area.
  • Cricut, vinyl and laser: closed paths with no overlapping lines.
  • DTF and DTG: a 300 ppi transparent PNG plus the vector source.
  • Promo items: few colors, thick enough lines, one layer per color.
  • Web: SVG and PNG.

When we can’t do what you want

  • Photographs. A vector can’t hold a photo. You choose Line art or a Flat illustration (4–8 colors), or a print-ready bitmap with the text and graphics redrawn around it.
  • Fine texture, copied exactly. The finest grain is simplified rather than copied pixel for pixel. A texture-layer version keeps the look as a bitmap layer.
  • Another company’s logo. We don’t take orders that obviously copy a well-known brand’s logo or wordmark.
  • Commercial fonts we don’t hold. We redraw your lettering as shapes, and the optional text layer uses only open-source fonts.
  • Embroidery stitch files and pad-printing plates. We prepare the artwork. A digitizer or plate maker makes the stitch or plate file.
  • What only your printer knows. The report says “check with your printer.”

Free print check

Run free print check →

Run free print check · See pricing · Questions

Sources

Read in October 2026. Full list with exact quotes: sources.csv.